VST Motion Sensor Light Switch, IR Handwave Activated Dimmable Light Switch for Closet Light LED Strip Light Under Cabinet Lighting with 12V JST Male and Female Connector (DC 12/24V 3A)

VST Motion Sensor Light Switch, IR Handwave Activated Dimmable Light Switch for Closet Light LED Strip Light Under Cabinet Lighting with 12V JST Male and Female Connector (DC 12/24V 3A)

$22.38
Skip to product information
VST Motion Sensor Light Switch, IR Handwave Activated Dimmable Light Switch for Closet Light LED Strip Light Under Cabinet Lighting with 12V JST Male and Female Connector (DC 12/24V 3A)

VST Motion Sensor Light Switch, IR Handwave Activated Dimmable Light Switch for Closet Light LED Strip Light Under Cabinet Lighting with 12V JST Male and Female Connector (DC 12/24V 3A)

$22.38

Overview

  • Operation Mode : ON-OFF
  • Current Rating : 3 Amps
  • Operating Voltage : 12 Volts
  • Contact Type : Normally Open
  • Connector Type : Plug In
  • Brand : VST
  • Switch Type : Dimmer Switch
  • Terminal : Jst
  • Material : Stainless Steel
  • Item dimensions L x W x H : 6 x 0.6 x 0.7 inches

About this item

  • 💁‍♀️【Tip】[Tip] This switch is compatible with both 12V and 24V lights. However, the original connector is a 12V JST male and female plug, which cannot be directly connected to VST’s 24V driver. The product includes 12V to 24V conversion cables, allowing you to connect the conversion cable first and then link it to the 24V power supply or light fixture.
  • 🏳️‍🌈【Motion Sensor Switch】It is activated by handwave. handwave for on/off with slowly mode, if hold your hand above the sensor, you can adjust the brightness within 10% ~100% in one way direction( Bright or Dark)..
  • 🏳️‍🌈【Smart Design】It has memory function, When power on the status is as same as power off last time. then handwave change brightnessto 100%. When the positive and negative poles are reversed, the product will not be damaged.
  • 🏳️‍🌈【Installation】The sensor need ressessed mounted. The input and output connector is JST female and male connector. Make sure your power adapter and LED lights connected are JST plugs. JST male and female both are 25 cm length and switch cable is 2 meters cable.
  • 🏳️‍🌈【Wide Application】This IR handwave sensor switch can be widely applicatedfor under cabinet, under shelf, counter, wardrobe, etc. Any places you want.
  • 🏳️‍🌈【Working Distance】The handwave working distance is 90mm in front of sensor, the dimming distance is 20mm ~90mm, the 0 ~ 10mm distance is blind zone with only handwave on/off funtion.
  • 🏳️‍🌈【Warranty】Provide 2-year warranty after-sales service, if you got any questions, please contact us first, we will try our best to help you.

You may also like